Wall To Wall Garage Storage

Sort the garage with wall-to-wall storage shelves for all your gear

Wall To Wall Garage Storage

Constructing a specialised storage system with shelves, tool racks and hooks can be expensive, but building DIY wall shelving gives you versatility without a hefty price. 

Materials for this system along a 4800mm wall add up to about $300, but it can cost less if you use scrap plywood and other offcuts. 

Each storage module hangs from a framework of vertical battens that are secured to the wall studs. 

Brackets or hooks can be secured to the sides for extra hanging space. 

Install the battens

Cut the battens from dressed all round (DAR) 42 x 30mm pine, about $4 a metre, adjusting the lengths to suit the wall. It doesn’t matter if the battens are positioned 450mm or 600mm apart.

Find the wall studs, then use a spirit level to check the battens are plumb to them. Secure the battens with 75mm x 10g self-drilling timber screws, spaced about 400mm apart.

TIP If you’re using hardwood battens, drill 2.5mm pilot holes.

mark batten points, install wall to wall garage storage, handyman
Mark batten positions with tape and flick  a chalkline to align the top of the battens. Drill pilot holes and secure with screws
 

Hang a wheelbarrow 

Keep the wheelbarrow off the floor using storage hooks, about $8 each from hardware stores, or timber cleats attached to the battens about 100mm above the floor. 

Add a 42 x 30mm noggin between two battens, adjusting the height to suit the wheelbarrow, then drill a pilot hole and secure a screw hook. 

To store, tilt the barrow onto the hooks, lean it against the noggin and turn the screw hook to hold it. 
 

attach two storage hooks to wall, handyman magazine
Attach two storage hooks to the wall about 100mm from the floor
 
wheeel barrow attached to wall, handyman magazine,
Secure a noggin across two battens to suit the height of the wheelbarrow

Make a tool rack

Hang long-handled tools either side of a horizontal rack for easy access. 

Cut two 400 x 100 x 19mm pieces of plywood, rounding one end, and secure 42 x 30mm pine between them.

Add 75 x 3.75mm bullethead nails either side of the rack, leaving 50mm protruding, then secure 1800mm high to the battens using 40mm x 8g screws. 
 

make a tool rack, handyman magazine
Use two offset timber screws on each side to secure the rack

drill countersunk, handyman magazine,
Drill countersunk 5mm diameter holes into tool handles for hanging

Mount the top shelf 

Make a sturdy, adaptable shelf and bracket system using plywood.

THE BRACKETS are made from a 2400 x 1200 x 19mm plywood sheet, about $68. This ensures a strong structure that easily holds 50kg. 

The 19mm thickness provides a wide surface for securing the shelves.

Cut the ply into 340 x 200mm pieces, mark L shapes with rounded ends, then use a jigsaw to cut them out. Secure the brackets to the battens with 50mm x 8g screws.

THE SHELVES can be cut from either 19mm structural plywood or 300 x 19mm laminated pine.
 

mount the top shelf, handyman magazine,
Mark up the brackets on square-cut pieces of 19mm plywood offcuts, then cut using a jigsaw with a timber blade

Store garden tools 

Build a rack to hold bulky tools such as a leaf blower. The rack is 865mm long with a 300mm wide shelf and 200mm wide back. All the parts are cut from 19mm structural plywood.

THE BRACKETS are cut to 280 x 200mm and secured to the shelf and to the back using 40mm x 8g screws.

THE SHELF has cutouts about 70mm wide and 200mm long. To determine the best shape, measure the diameter of the tools and make cutouts using a jigsaw. Adjust the shape for a snug fit. 

Position the rack, then secure it to the battens through the back using PVA adhesive and 40mm x 8g screws.

store garden tools, handyman magazine,
Build a rack to hold bulky tools such as a leaf blower

cut the slots, handyman magazine,
Cut slots in the shelf, modifying  the shape so the tools fit securely

Vote It Up: 
Wall To Wall Garage Storage

See also

Adam's Workshop Overhaul
No matter whether you own enough tools to fill a shed or just a few for maintaining a bicycle, you need a space to store them...
DIY Classic Workbench
No DIY space is complete without a sturdy and stable workbench, and if this one looks familiar, it’s probably because it’s a...
Workbench Inspiration

This wall-mounted bench features strip lighting, powerpoints and dust extraction

The spaces that are used for DIY projects range from a garden shed or corner of the garage to a purpose-designed workshop....
Install A Sectional Garage Door Opener
Before automating a sectional garage door, it’s important to do research to ensure the opener matches the door.  A...
Install An Automatic Door Opener To A Rolling Garage Door
Tired of getting in and out of the car just to open and close the roller door on the garage, especially on rainy days?  ...
7 Tips For Using A Circular Saw
Subscribe to Handyman on Youtube A circular saw is a powerful tool that’s ideal for making straight cuts in a variety of types...